Other Products

Customized Display

We hereby manufacture Customised Jumbo display like 2″ ,4″ , 6″ 8″ etc. We have universal input and range programmable.

Electropneumatic Positioner

This Electropneumatic positioner has Easy maintenance , Precise calibration with simple SPAN and ZERO adjustments as well Simple conversion to direct acting or reverse acting , 1/2 split range available , Rugged aluminum housing with corrosion-resistant coating, Vibration resistant design ,Stainless steel gauges standard etc .

I to P Converter

ABB Electro pneumatic signal converters are the link between the control rooms and pneumatic actuators. The type TEIP 11 I/P Converter with various housings is available for cabinet installation, field installation, rail installation and as slide-in type. The signal conversion is based on standard signals.

Orifice Plate Assembly

Oil & Gas / Petrochemical Industries / Power StationsOil & Gas / Petrochemical Industries / Power StationsType Of Elements Square Edge Orifice / Quadrant Orifice / Conical Entrance Orifice / Segmental orificeMaterial. As per Customer’s requirements / Main material Reference ASTM-ASME Code

Smart Positioner

The SIPART PS2 is the most widely used valve positioner for linear and part-turn actuators in industrial applications. The all-round positioner of Siemens provides an extensive range of functions and is well equipped – even for extreme ambient conditions. The following enclosure options are available: Polycarbonate, Aluminum, Stainless steel, Flameproof aluminum or 316L stainless steel.

Speeding Measuring Instruments

Accsys make Process Indicator that caters to wide applications of industries with regard to ph indication, temperature compensation, pressure, flow, turbine and speed. Our range is developed using latest trends of industry and offered at market competitive prices.

Solenoid valve

3/2, 5/2, 5/3 valves. Suitable for manifold mounting. Mounting provision for individual unit. Compact size. Manual override. Wide range of manifolds available. Wide range of coil voltages. Important To prevent malfunctioning of the valve while operating the manual override (or) while operating the solenoid coil, ensure to have a minimum air supply of 1200 lpm to the valve through a tube of minimum Ø8 outer diameter (with minimum Ø5.5 internal diameter)

Pressure transmitter For general industrial applications Model A-10

The model A-10 pressure transmitter for general industrial applications is not only notable for its compact design, but it also offers excellent quality at an extremely

Process pressure transmitter Model IPT-10, standard version Model IPT-11, flush diaphragm

With its 4 ... 20 mA, HART®, PROFIBUS® PA or FOUNDATION™ Fieldbus output signals, combined with either intrinsic safety or flameproof

Pressure Transmitter for highest pressure applications Model HP-1

New applications, for example internal hydro forming continue placing new and different demands on pressure measuring technology. The model HP-1 meets these

Pressure sensor For highest pressure applications to 15,000 bar Model HP-2

For highest pressures The model HP-2 pressure sensor has been specifically developed for demanding high-pressure applications up

Process pressure transmitter Model IPT-10, standard version Model IPT-11, flush diaphragm

With its 4 ... 20 mA, HART®, PROFIBUS® PA or FOUNDATION™ Fieldbus output signals, combined with either intrinsic safety or flameproof

Pressure transmitter For applications in hazardous areas Model IS-3

The pressure transmitters of the IS-3 series have been specifically designed for the highest industrial requirements in hazardous areas and feature the common approvals, such as ATEX, IECEx, FM and CSA, as well as a SIL rating per IEC 61508 / IEC 61511 for use in the process industry.

High-performance submersible pressure transmitter For level measurement Model LH-10

For demanding measurement tasks The LH-10 submersible pressure transmitter has been designed for level measurement in contact with the medium in harsh operating conditions. It offers an accuracy of 0.25 % and, with an ingress protection of IP 68, is suitable for permanent level measurements up to 300 m water column.

High-performance submersible pressure transmitter For level measurement Model LH-20

For the most demanding measurement tasks The model LH-20 submersible pressure transmitter has been designed for the most demanding of level measurement tasks. A slender design, highest accuracies, low temperature errors and an adjustable measuring range ensure the suitability of the LH-20 for all submerged level measurements.

OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)

The model O-10 pressure sensor has been developed for a wide variety of industrial applications. The large range of process and electrical connections as well as all commonly used pressure ranges and output signals set the model O-10 apart.

Pressure transmitter for precision measurements Model P-30, standard version Model P-31, flush version

Precise The model P-30 and P-31 pressure transmitters have been developed for precision measurements. Through the use of special WIKA pressure sensors, precision measurements with a maximum measuring deviation of as low as 0.05 % of span are guaranteed. As a result of their active temperature compensation, these pressure transmitters have no additional temperature error in the range of 10 ... 60 ° C.

Pressure sensor For precision measurements Model P-30, P-31

The model P-30 and P-31 pressure sensors have been developed for precision measurements and guarantee precision measurements with a maximum measuring deviation of as low as 0.05 % of span. As a result of their active temperature compensation, these pressure sensors have no additional temperature error in the range of 10 ... 60 °C [10 ... 140 °F].

Pressure transmitter for refrigeration and air-conditioning applications Model R-1, with hermetically welded thin film measuring cell

Application area in refrigeration and air-conditioning technology The model R-1 pressure transmitter has been optimally designed for the specific requirements of refrigeration and air-conditioning technology. Its monolithic construction dispenses with the need to use seals on the process side. This enables the model R-1 to be used with all typical refrigerants (e.g. Freon and Ammonia).

Pressure transmitter For refrigeration and air-conditioning applications Model R-1

Application area in refrigeration and air-conditioning technology The model R-1 pressure transmitter has been optimally designed for the specific requirements of refrigeration and air-conditioning applications. Its monolithic construction dispenses with the need to use seals on the process side. This enables the model R-1 to be used with all typical refrigerants.

High-quality pressure transmitter For general industrial applications Model S-10

The model S-10 pressure transmitter for general industrial applications is the ideal solution for customers with demanding measuring requirements. It features a very good accuracy, a robust design and an exceptional number of variants, meaning it can be suited to the widest range of applications.

Flush pressure transmitter for viscous and solids-containing media

Flush pressure transmitter For viscous and particle-laden media Model S-11

Expert for viscous and particle-laden media The model S-11 pressure transmitter with flush diaphragm has been specifically designed for the measurement of viscous, paste-like, adhesive, crystallising, particle-laden and contaminated media, which would clog the pressure channel of conventional process connections.

High-quality pressure transmitter For general industrial applications Model S-20

The model S-20 pressure transmitter for general industrial applications is the ideal solution for customers with demanding measuring requirements. It features a very good accuracy, a robust design and an exceptional number of variants, meaning it can be suited to the widest range of applications.

Pressure transmitter For sanitary applications Model SA-11

The pressure transmitter SA-11 is designed especially for the requirements of the food and beverage, pharmaceutical and biotechnology industries. It is particularly suitable for the special conditions of CIP/ SIP cleaning processes, such as chemical stability towards cleaning liquids and high temperatures. The flush diaphragm is directly welded to the process connection.

Pressure transmitter for low pressure applications Model SL-1

The model SL-1 pressure transmitter has been designed for measurement of the lowest pressures in dry, gaseous and non-aggressive media. It is characterised by its high accuracy and its very robust and compact design. Through its versatile ability to combine different industrial standard signals and electrical connections it offers a wide range of instrument variants.

Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm

Instrument construction The model UPT-2x process transmitter has been developed for applications which require an intelligent sensor. Particularly the integrated temperature compensation makes the process transmitter interesting for a wide range of applications.

MiniWave Ultrasonic Level Series

MiniWave is a compact, loop-powered ultrasonic level transmitter for continuous measurement of liquids. As a price leader, it does not compromise on good value; and provides effortless and intuitive operation. Easy and flexible mounting combined with high chemical compatibility and 12 metres (40ft) measuring range makes the MiniWave suitable in multiple applications in all industries.